MINING EQUIPMENT
Original Paper
UDC 622.678.53 © Zh.A. Nishonova?, S. Gylymuly, T.S. Belyaeva, V.S. Ryzhikov, 2024
ISSN 0041-5790 (Print) • ISSN 2412-8333 (Online) • Ugol’ – Russian Coal Journal, 2024, № 4, pp. 88-91
DOI: http://dx.doi.org/10.18796/0041-5790-2024-4-88-91
Title
MODELLING OF THE SUSPENSION GEAR FOR A SKIP MINE HOIST WITH THE RUBBER ROPE TRACTION DEVICE
Authors
- ?, S. Gylymuly, T.S. Belyaeva, V.S. Ryzhikov
Mining Industry" of National University of Science and Technology “MISIS” (NUST “MISIS”), Moscow, 119049, Russian Federation, e-mail: m1707439@edu.misis.ru
Authors Information
Nishonova Zh.A. – Postgraduate Student Department of Mining Equipment, Transportation and Mechanical Engineering, Mining Industry" of National University of Science and Technology “MISIS” (NUST “MISIS”), Moscow, 119049, Russian Federation, e-mail: m1707439@edu.misis.ru
Gylymuly S., - Postgraduate Student Department of Mining Equipment, Transportation and Mechanical Engineering, Mining Industry" of National University of Science and Technology “MISIS” (NUST “MISIS”), Moscow, 119049, Russian Federation, e-mail: m1606832@edu.misis.ru
Belyaeva T.S., - Postgraduate Student Department of Mining Equipment, Transportation and Mechanical Engineering, Mining Industry" of National University of Science and Technology “MISIS” (NUST “MISIS”), Moscow, 119049, Russian Federation, e-mail: ts.shitikova@yandex.ru
Ryzhikov V.S. - Master's student, Department of Mining Equipment, Transportation and Mechanical Engineering, Mining Industry" of National University of Science and Technology “MISIS” (NUST “MISIS”), Moscow, 119049, Russian Federation, e-mail: m2207576@edu.misis.ru
Abstract
This paper provides a review of the current research on mine hoists, which helped to determine that the existing designs of suspension gear require upgrading when applied to hoisting systems with the rubber rope traction devices. In this connection the authors propose an original design of the suspension gear. A digital model has been created in SolidWorks software to estimate its parameters. The research included a series of tests, which results allowed obtaining the dependences of maximum stresses in the most critical part, i.e. the suspension bracket, on its design parameters under various service loads corresponding to the operating conditions of a mine hoist with a rubber rope traction device.
Keywords
Hoisting installations, Skips, Digital modelling, Suspension gear, Rubber ropes.
References
1. Galkin V. I., Sheshko E. E., Dyachenko V. P., Sazankova E. S. The main directions of increasing the operational efficiency of high productive belt conveyors in the mining industry. Eurasian Mining. 2021;(2):64–68. DOI: 10.17580/em.2021.02.14.
2. Rakhutin M., Kashirsky A., Lagunova Y. Calculation of productivity of multi-section trawls for extraction of ferromanganese nodules. E3S Web of Conferences. 2020;(177). DOI 10.1051/e3sconf/202017703010.
3. Muminov R.O., Kuziev D.A., Zotov V.V., Sazankova E.S. Performability of electro-hydro-mechanical rotary head of drill rig in open pit mining: A case-study. Eurasian Mining. 2022;(1):76–80. DOI: 10.17580/em.2022.01.16.
4. Kouziyev D., KrivenkoА., Chezganova D., Blumensteiun V. Sensing of dynamic loads in the open-cast mine combine. E3S Web of Conferences.105(2):03014. DOI:10.1051/e3sconf/201910503014.
5. Формализация процесса выбора технологий отработки месторождений полезных ископаемых / П.А. Каунг, В.В. Зотов, М.А. Гаджиев и др. // Горный информационно-аналитический бюллетень (научно-технический журнал). 2022. № 2. С. 124-138. DOI 10.25018/0236_1493_2022_2_0_124.
Kaung P.A., Zotov V.V., Gadzhiev M.A., Artemov S.I., Gireev I.A. Formalization of selection procedure of mineral mining technologies. Gornyj Informatsionno-Analiticheskij Byulleten. 2022;(2):124-138. (In Russ). DOI: 10.25018/0236_1493_2022_2_0_124.
6. Shaforostova E.N., Kosareva-Volod’ko O.V., Belyankina O.V., Solovykh D.Y., Sazankova E.S., Sizova E.I., Adigamov D.A. A Tailing Dump as Industrial Deposit; Study of the Mineralogical Composition of Tailing Dump of the Southern Urals and the Possibility of Tailings Re-Development. Resources. 2023:12(2):28. DOI 10.3390/resources12020028.
7. Оптимизация параметров шахт, при отработке запасов угля в сложных горно-геологических условиях / А.В. Джигрин, В.В. Мельник, М.Г. Лупий и др. // Горный информационно-аналитический бюллетень (научно-технический журнал). 2020. № S37. С. 3-11. DOI: 10.25018/0236-1493-2020-11-37-3-11.
Dzhigrin A.V., Melnik V.V., Lupiy M.G., Bakin V.A. Optimization of mines parameters when mining coal reserves in difficult mining and geological conditions. Gornyj Informatsionno-Analiticheskij Byulleten. 2020;11/37:3-11. (In Russ). DOI: 10.25018/0236-14932020-11-37-3-11.
8. Gerike B., Drozdenko Y.,Kuzin E. et al. Formation of Comprehensive Service System of Belt Conveyor Gearboxes. E3S Web of Conferences.2018;(41):03011. DOI: 10.1051/E3SCONF/20184103011.
9. Опыт эксплуатации шахтных подъемных установок, оснащенных системами непрерывного контроля / Г.Д. Трифанов, А.А. Князев, А.П. Филатов и др. // Безопасность труда в промышленности. 2019. № 6. С. 52-58. DOI 10.24000/0409-2961-2019-6-52-58.
Trifanov G.D., Knyazev A.A., Filatov A.P., Lauk V.V. Experience of operation of mine lifting installations equipped with continuous monitoring systems. Bezopasnost’ truda v promyshlennosti. 2019;(6):52-58. [In Russ]. DOI 10.24000/0409-2961-2019-6-52-58.
10. Ermolovich E.A., Ivannikov A.L., Kongar-Syuryun C.B. et al. Creation of a Nanomodified Backfill Based on the Waste from Enrichment of Water-Soluble Ores. Materials. 2022;15(10). DOI 10.3390/ma15103689.
11. Reshetnyak S., Maksimenko Y., Zakharova A. Investigation of the electric drive system of the lifting unit with parallel coordinate correction. E3S Web of Conferences. 2021;(315):1-5. DOI: 10.1051/e3sconf/202131503028.
12. Гылымулы С., Тиагалиева Ж.А., Белянкина О.В., Беляев А.М. Разработка имитационной модели торможения шахтной подъемной установки в системе Matlab. Уголь. 2022. № 10. С. 50-54. DOI 10.18796/0041-5790-2022-10-50-54.
Gylymuly S., Tiagalieva Zh.A., Belyankina O.V., Belyaev A.M. Developing a simulation model for braking a mine hoist in the Matlab software. Ugol’. 2022;(10):50-54. (InRuss.). DOI: 10.18796/0041- 5790-2022-10-50-54.
13. Горнопроходческие подъемные машины в технологических процессах разработки месторождений на больших глубинах / А.И. Курочкин, С.В. Подболотов, Б.М. Габбасов и др. // Горный информационно-аналитический бюллетень (научно-технический журнал). 2020. № S38. С. 3-15. DOI 10.25018/0236-1493-2020-11-38-3-15.
Kurochkin A.I.,Podbolotov S.V.,Gabbasov B.M.,Romanko E.A.,Tulubaeva M.F.Miningliftingmachinesinthetechnologicalprocesses offield developmentat greatdepths. Gornyj Informatsionno-Analiticheskij Byulleten. 2020;11/38:3-15. (InRuss.). DOI:10.25018/0236-1493-2020-11-38-3-15.
14. Перекутнев В.Е., Зотов В.В. Сравнительная оценка резинотросовых канатов для рудничных вертикальных подъемных установок // Горный информационно-аналитический бюллетень (научно-технический журнал). 2020. № 7. С. 85-93. DOI 10.25018/0236-1493-2020-7-0-85-93.
Perekutnev V.E., Zotov V.V. Comparative assessment of rubber steel cables for vertical mine hoists. Gornyj Informatsionno-Analiticheskij Byulleten. 2020;(7):85-93. (In Russ.). DOI: 10.25018/0236-1493-2020-7-0-85-93.
15. Перекутнев В.Е., Зотов В.В. Моделирование приводных шкивов подъемных установок с резинотросовыми канатами // Горный информационно-аналитический бюллетень (научно-технический журнал). 2020. № 6. С. 105-114. DOI 10.25018/0236-1493-2020-6-0-105-114.
Perekutnev V.E., Zotov V.V. Modeling drive wheels of hoisting machines with rubber cables. MIAB. Gornyj Informatsionno-Analiticheskij Byulleten. 2020;(6):105-114. (In Russ.). DOI: 10.25018/02361493-2020-6-0-105-114.
16. Bardovskiy A.D., Gorbatyuk S.M., Gerasimova A.A., Basyrov I.I. Analysis of operation features of sizing screen with parametric excitation. Eurasian Mining. 2021;(1):61–64. DOI: 10.17580/em.2021.01.12.
17. Разработка модели оценки эффективности системы охлаждения рабочей жидкости гидравлического карьерного экскаватора / З.К. Кхань, А.Е. Кривенко, Е.Ю. Пудов и др. // Горный журнал. 2021. № 12. С. 64–69. DOI 10.17580/gzh.2021.12.12.
Giang Quoc Khanh, Krivenko A.E., Pudov E.Yu., Kuzin E.G. Performance evaluation model for power fluid cooling system of hydraulic excavators. Gornyi Zhurnal. 2021;12:64–69. DOI 10.17580/gzh.2021.12.12.
18. Pleshko M.S., Pankratenko A.N., Pleshko M.V., Nasonov A.A. Assessment of stress–strain behavior of shaft lining in bottomhole area during sinking by real-time monitoring and computer modeling data. Eurasian Mining. 2021;(1):25–30. DOI: 10.17580/em.2021.01.05.
19. Имитационное моделирование режимов работы оборудования комплексно-механизированного забоя угольной шахты / С.С. Кубрин, С.Н. Решетняк, И.М. Закоршменный и др. // Устойчивое развитие горных территорий. 2022. Т. 14. № 2. С. 286-294. DOI 10.21177/1998-4502-2022-14-2-286-294.
Kubrin S.S., Reshetnyak S.N., Zakorshmenny I.M., Karpenko S.M. Simulation modeling of equipment operating modes of complex mechanized coal mine face. Ustojchivoe razvitie gornykh territorij. 2022;14(2):286–294. (In Russ.). DOI: 10.21177/1998-45022022-14-2-286-294.
20. Цифровая модель тормозного постамента рудничной подъемной установки с резинотросовым тяговым органом / С. Гылымулы, Л.И. Кантович, Ж.А. Тиагалиева и др. // Горный информационно-аналитический бюллетень (научно-технический журнал). 2022. № 6. С. 62–76. DOI: 10.25018/0236_1493_2022_6_0_62.
Gylymuly S., Kantovich L.I., Tiagalieva Z.A., Belyankina O.V. Digital model of brake plinth of mine hoist with rubber cable pulling equipment. Gornyj Informatsionno-Analiticheskij Byulleten. 2022;(6):62-76. (In Russ.). DOI: 10.25018/0236_1493_2022_6_0_62.
21. Gubanov S., Petsyk S., Komissarov A. Simulation of stresses and contact surfaces of disk rolling cutters with the rock when sinking in mixed soils. E3S Web of Conferences. 2020;177:1-5. DOI: 10.1051/e3sconf/202017703008.
22. Зиборова Е.Ю., Мнацаканян В.У. Обоснование геометрических параметров футеровочных пластин приводного барабана ленточного конвейера // Горные науки и технологии. 2022. № 7(2). С. 170-179. DOI 10.17073/2500-0632-2022-2-170-179.
Ziborova E.Yu., Mnatsakanyan V.U. Justification of geometrical parameters of lining plates for a belt conveyordrive drum. Gornye nauki I tekhnologii. 2022;7(2):170–179. DOI 10.17073/2500-0632-2022-2-170-179.
For citation
Nishonova Zh.A., Gylymuly S., Belyaeva T.S., RyzhikovV.S. Modelling of the suspension gear for a skip mine hoist with the rubber rope traction device. Ugol’. 2024;(4):88-91. (In Russ.). DOI: 10.18796/0041-5790-2024-4-88-91.
Paper info
Received February 25, 2024
Reviewed February 28, 2024
Accepted March 26, 2024
